Greenteeth - Full Setup for *Bandit 2000XP & Rayco 1625 Super Jr* Stump Grinder

Description

ORIGINAL "REAL" GREENTEETH MANUFACTURED IN MORENCI MICHIGAN, USA
This is a full setup for Bandit 2000XP and Rayco 1625 Super Jr stump grinders.  Green Manufacturing recommends 700 Series Greenteeth and Pockets for this machine in the following configuration:
- 12x Angled Pockets
- 6x Straight Pockets
- 18x Greenteeth
- 18x 2" LoPro Bolts
About Greenteeth:
The signature Greenteeth pocket-and-tooth configuration was first put into the frost filled ground on a cold January day in Michigan. The results were impressive then and are to this day. A tough carbide concave dish as a cutting edge is the innovative design that allows Greenteeth the ability to actually sheer rather than shred. The sheering is a smoother motion that requires less power exertion from the machine and allows faster, more efficient stump cutting. The tooth can be rotated using only a standard wrench and without having to remove the pocket! Since each tooth can be rotated to a new edge three times its like having three teeth in one! In the same way any tooth can be easily moved to any pocket position on the wheel thus allowing even more cutting life from each tooth.
!!!Attention!!!: Items are gathered into as few containers as possible to minimize shipping costs.  Please be careful, as these containers may be heavy!!!